Active visits (estimate): —

Storm damage roof repairs · A focused guide

What should be assessed when a ridge piece moves after high winds?

Published by Big Ben Roofing Ltd

Report the changed ridge location and whether material has fallen or water has appeared indoors. A displaced piece identifies an affected detail but does not establish that the adjoining roof is sound or that the entire ridge needs renewal. Ask how the assessor will consider adjacent components and define the repair boundary. Keep clear of loose material and do not climb up to reposition it, retrieve it or check whether other pieces can move.

Locate the change on an overall view

A safe existing photograph of the whole elevation helps show whether the concern is at the main ridge, a hip or another raised roof detail. Say when the change was noticed and which weather event preceded the observation without claiming a confirmed cause. Include indoor symptoms separately. If a path or entrance lies below, tell the contractor so the exposed space is considered alongside the roof-level defect.

Ask which connected areas are included

The proposed assessment should explain what has been viewed and what needs closer access. Ask whether neighbouring covering, the supporting ridge detail and adjoining junctions are within its boundary. HSE highlights the need to plan protection from falling material around building work. A repair quote should therefore define both the affected roof components and the access or occupied-area arrangements, with any temporary intervention described separately from the permanent work.

Useful details to record

  • Identify the changed ridge or hip on an overall image.
  • Report fallen material and indoor water separately.
  • Mention any entrance or path beneath the affected detail.
  • Ask why the proposed repair boundary suits the findings.

Use information already available from indoors or ground level. Do not climb onto the roof or disturb materials to complete this checklist.

Does one fallen ridge piece mean every ridge component is loose?

That cannot be established from the fallen piece alone. Ask how the connected run has been assessed and which findings support local repair or a wider scope, including any limits caused by weather or access at the visit.

Background reading

General guidance helps frame the questions. The cause, suitable materials and scope depend on inspection of the particular roof.

Related questions

What if slate or tile fragments are found in the garden after a storm?

Report fallen roofing fragments and their location without assuming the source, approaching unstable edges or taking a sample from the roof.

How should older roof wear be recorded alongside newly noticed storm damage?

Distinguish earlier roof concerns, new observations and uncertain causes so a repair proposal follows the evidence rather than an assumed event history.

Discuss what you have noticed

Include your postcode, the affected roof section and when the concern appears. The team will review the enquiry and confirm the next step, scope and availability.

Request a roofing assessment